Dual-layer foam is sculpted to provide maximum surface area in your cramped airbox . Where needed, a 3-layer foam with a backfire-resistant layer is used to eliminate the restrictive, stock backfire screen. A billet-aluminum internal cage that fills and supports the filter, reducing engine-pulse distortions . In short, anything that will make your bike’s engine dirt-tight and running at it’s very best . Plus, it’s all developed with and used by the Factory Race Teams.

The PowerFlow Kit . Only from TwinAir.

Lightweight, leak-proof, fool-proof fit ensures high-performance.

All 4T PowerFlow Kits include a Pre-Oiled Triple-Stage Fire-Resistant Air Filter.

The best filter in the world can’t do it’s job if there are leaks in the seal of the airbox. TwinAir’s PowerFlow Kits ensure a leak-proof, fool-proof fit with a rigid, lightweight, billet-aluminum cage that replaces your flimsy, plastic stock cage, and a billet aluminum flange with a rubber seal that bolts tight to your airbox.  Our PowerFlow Kits use open cages without backfire screens and higher performance filters, in general this always creates more airflow for the bike!

• No backfire cage

• Anodized for durability

• Lightweight aluminium flange

• Pre-oiled triple-stage fire-resistant air filter

POPULAR POWERFLOW EXAMPLES:

PART #:

DESCRIPTION:

FITMENT:

 

RRP:

TA150225C

PowerFlow Kit

HONDA CRF250R 2018-2019 | CRF450R/RX 2017-2020

$225.95

TA150216C

PowerFlow Kit

HONDA CRF150R 2007-2020

 

$349.95

TA152222C

PowerFlow Kit

YAMAHA YZ250F 2019-2020 | YZ450F 2018-2020

 

$349.95

TA152213C

PowerFlow Kit

YAMAHA 2-STROKE 1997-2020

 

$179.95

TA151122C

PowerFlow Kit

KAWASAKI KXF450 2016-2018 | KXF250 2017-2020

 

$209.95

TA151125C

PowerFlow Kit

KAWASAKI KXF450 2019-2020

 

$209.95

TA154222C

PowerFlow Kit

KTM/HUSQ 4-STROKE

 

$184.95

TA154223C

PowerFlow Kit

KTM/HUSQ 2-STROKE

 

$184.95

Airbox Sealing Rings (ISR, OSR)

Fix leaky airbox issues! PowerFlow Upgrades & OE Replacements.

Airbox Sealing Rings are an upgrade to the PowerFlow Kit. It is utilised to assist with the mounting of the Air Filter Skin to ensure it stays perfectly in place. It can also be used with the OEM cage to allow better mounting of an air filter skin.

OUTSIDE

INTAKE

Powerflow Throttle Body Kit

Get faster, smoother throttle response where you need it most!

Twin Air’s PowerFlow Throttle Body Kits can significantly increase horsepower and throttle response in low to mid range. The PowerFlow Throttle Body Kit is an off shelf, easy to install, throttle body performance kit.

  • Get faster, smoother throttle response where you need it most
  • Eliminate high-end flow loss by lowering flow restriction
  • Install/remove without damaging the OEM throttle body
  • Count on maintenance-free reliability after installation

The kit comes with two different performance options.

One for low-mid range performance and the other for top-end performance.

Configuration #1

The Twin Air Powerflow Throttle Body Kit Configuration #1 provides low-mid range gains utilizing a smaller diameter intake tube and a lower profile throttle valve. This configuration increases the throttle response making the power more controllable.

Configuration #2

The Powerflow Throttle Body Kit Configuration #2 is designed for increasing top end power gains by reducing the surface area of the throttle body valve. This configuration does not use the orange intake tube.

PART #:

FITMENT:

TA160700

Honda CRF250 2012 CRF450 2011/2012

TA160701

Honda CRF250 2013/2017 CRF450 2013/2016

TA160702

Honda CRF450R / CRF450RX 2017/2019

TA160703

Honda CRF250R 2018

TA160704

Honda CRF250R 2019

TA160710

Kawasaki KXF250 2011/2012

TA160711

Kawasaki KXF250 2013

TA160712

Kawasaki KXF450 2009/2012

TA160713

Kawasaki KXF250 2014/2016 KXF450 2013/2015

TA160714

Kawasaki KXF450 2016/2018

TA160715

Kawasaki KXF250 2017

TA160716

Kawasaki KXF250 2018/2019

TA160717

Kawasaki KXF450 2019

TA160718

Kawasaki KXF250 2020

PART #:

FITMENT:

TA160720

Yamaha YZF450 2010/2013

TA160721

Yamaha YZF250 2014/2018 YZF450 2014/2017

TA160722

Yamaha YZF450 2018/2019 YZF250 2019

TA160730

Suzuki RMZ 250 2009/2014

TA160731

Suzuki RMZ 450 2008/2014

TA160732

Suzuki RMZ 250 2015/2018

TA160733

Suzuki RMZ 450 2015/2017

TA160734

Suzuki RMZ 450 2018/2019 RMZ 250 2019

TA160740

KTM SXF250/350/450 11/12

TA160741

KTM SXF250 13/2015 Husqvarna FC 250 14/2015

TA160742

KTM SXF350/450 2013/2015

TA160743

KTM SXF 250/350/450 2016/2019

TA160744

KTM / Husqvarna Enduro models 2017/2019

TESTED: KAWASAKI KX250F EQUIPPED WITH A TWIN AIR POWERFLOW THROTTLE BODY KIT.

FUEL FILTERS

TwinAir’s monofilament screen pocket inserts in your tank to catch particles as small as 40 microns (.00165”) while allowing the gas to flow freely. The flange is custom-sized for each modern 4-stroke model to ensure a leak-proof seal. Just remove the filter periodically, turn it inside-out, and clean out the debris that could have been in your engine.

RADIATOR SLEEVES

The protective vest of nylon-coated, glass yarn mesh is designed to shed mud, dirt and sand before it can build up and choke your radiator. Tough breathable and easy to install; Simply remove the radiator louvres and slide the sleeve over them. Custom-fit includes pre-punched holes for the mounting pins.

UNIVERSAL FOAM

Skid Plate Foam:  This black polyurethane/polyester reticulated foam fits between the skid plate and the engine, keeps sand, grid and dirt from sticking to the engine, can also be used on other places of the bike.

Footpeg Foam:  Foam that fits around the footpegs and keeps sand, stones, grit and dirt from sticking on or between the footpegs.

FUEL FOAMS

Fuel Tank Foam: Used in large tanks of high performance vehicles, these impenetrable polyurethane polyester cubes baffle fuel to control surging, eliminate sloshing and the slapping noise, and stabilize fuel movement during sharp turns. Performance is improved, and fuel capacity loss is less than 1%.